Skip to main content

Robotturn - 3 basic models - 1000 variations

XF-Series - XS-Series - XT-series

Robotturn Flexy-cell

Robotturn: one-source integrated automatic turning solutions.

Our new generation compact turning machines incorporate a wide range of enhancements that make Robottturn® lathes better than ever. Our engineers reviewed and improved all aspects including motion control, integration of automation systems for material handling, coolant containment, chip evacuation, ergonomics, and serviceability – to create the highest quality, most reliable machine tools available.  Each machine is factory automated to deliver the highest accuracy and repeatability while minimizing set-up time. This allows Robotturn to provide compact solutions with the greatest efficiency today and the flexibility needed for the jobs of tomorrow.

By keeping all the things simple, we can control our cost better than whoever and guarantee a reliable production.

BOOSTING EFFICIENCY IN PRECISION TURNING

Robotturn guarantees you a good profit again!

As today, in Europe, good skilled machine operators are extreme difficult to find, it is a real challenge for many manufacturers to bring them in and keep them.

Adding to that problem the fact that your skilled employees are spending their valuable time handling material, loading and unloading parts and completing other low level tasks, which is certainly not the optimal use of their talents. By automating some lower-skill-level procedures, you will be able to improve throughput and use your employees to their fullest potential.

In plus we do challenge a much bigger problem everybody is aware of: labour-cost, the biggest expense from the production process, is dramatically increasing

To compete with countries with labour rates far under ours and with companies non-respecting working times, we must always be looking for ways to do the job better, faster and with fewer labour hours for each part produced and this with less people.

To counter this difficult market evolution, Robotturn® has designed together with a great maker with many years’ experience as OEM lathe manufacturer for big names, a range of affordable compact flexy turning cells for unmanned or minimally staffed manufacturing.

For turning bar material, pre-formed blanks, long shafts and parts with a diameter larger than the spindle capacity, we offer different models of lathes with an integrated gantry Robot-loader-unloader for fully automatic loading/unloading and unmanned operation.

Automated processes now offer the highest potentials for increase of productivity. By automating tasks that require lesser skills, you will be able to increase throughput and use your operators to their fullest potential. At the same time, consistent production quality is achieved. This leads to economic success and the growing pressure of rising costs is countered efficiently.

Robotturn® has developed this new Robot-cells based on over 25 years of experience in the metalworking industry. No one understands better than us that metalworking companies are struggling to stay in the market. Customers expect shorter delivery times, margins are under pressure, and there is a growing shortage of skilled operators. Moreover, the expensive CNC machines have an insufficient number of spindle hours.

The mission of Robotturn® is to help metalworking companies become more profitable immediately, even when producing smaller series. The new Robot-cells provides a standard and easily accessible solution, which is successfully being used by many companies.

ALL the DIMESIONS OF THE CAPACITY OF THE GANTRY ROBOT ARE ONLY FOR STANDARD GANTRY GRIPPERS

BIGGER SIZE PARTS CAN BE HANDLED WITH OTHER GRIPPERS

THE BASIC LATHE MACHINE: XF MODEL

Our new generation compact turning centers machines incorporate a wide range of enhancements that make Robotturn lathes better than ever. Our engineers reviewed and improved all aspects including motion control, integration of automation systems for material handling, coolant containment, chip evacuation, ergonomics, and serviceability – to create the highest quality, most reliable turning centers  machine tools available. The XS Lathe range consists of a rigid flatbed structure made of high quality cast iron featuring high stability and good vibration dampening capacity.

• High Performance combined with SUPER compact design
• High flexibility: bar and chuck work
• Option for automation peripherals to meet any need.

The new design provides smooth chip disposal and easier operator access.

Robot handling
Shaft feeding
  • parts diameter :Ø = 21/25 mm max
  • parts length : L= 300 (800)mm max
  • robot load 3kg x 2
  • Payload 8kg
  • Shaft loader :on demand
Robot handling
Pallet feeding
  • parts diameter :Ø = 120 mm max
  • parts length : L= 80mm max
  • robot load 3kg x 2
  • pallet diam 120 or 160 mm

THE AFFORDABLE WORKHORSE : - XS MODEL

The XS Lathe range consists of a rigid slant-bed structure made of high quality cast iron featuring high stability and good vibration dampening capacity.

All the main casting components of the lathes are structural analysed by finite element methods (FEM). The boundary conditions are assigned reasonably and adequately to optimize the structures and rib distribution of the base, saddle and headstock to reach high rigidity and better stability. The headstock is mounted on the same surface of the guide ways. This design shortens the transmission path of cutting force and stabilizes the cutting capability.

Major structural components have been combined into one solid platform.  The low center of gravity 45˚ slantbed design provides the most rigid foundation possible for the headstock, turret, and tailstock.

Robot handling
Shaft feeding
  • parts diameter :Ø = 40/45 mm max
  • parts length : L= 330 (800)mm max
  • robot load 5kg x 2
  • Payload 12kg
  • Shaft loader :on demand
Robot handling
Pallet feeding
  • parts diameter :Ø = 160 mm max
  • parts length : L= 100mm max
  • robot load 5kg x 2
  • pallet diam 160 or 200 mm

MAXIMUM STRENGTH

XT - MODEL

The XT range consists of a rigid single piece slant (inclined) bed structure made of high quality cast iron featuring high stability and good vibration dampening capacity.

The new XT range combines the slant bed with a hydraulic tailstock.  Major structural components have been combined into one solid platform.  

The Robotturn XT series is capable of performing heavy-duty turning and maintaining long-term high-precisionaccuracy.  More rigidity also means extended tool life. Built to withstand years and years of rigorous high production turning, the heavily ribbed, one-piece,thermally balanced bed and casting parts are of "Meehanite" casting.

The 45 degrees true slant bed design further provides superior support for the headstock, turret, and tailstock, thus, creating the rigidity neededfor long-term high precision turning and efficient chip removal.

Robot handling
Shaft feeding
  • parts diameter :Ø = 45 mm max
  • parts length : L= 370 (900)mm max
  • robot load 8kg x 2
  • Payload 15kg
  • Shaft loader :on demand
Robot handling
Pallet feeding
  • parts diameter :Ø = 200 mm max
  • parts length : L= 150mm max
  • robot load 8kg x 2
  • pallet diam 200 mm

Robotturn - Boosting your profit

Our new generation of robot-lathes is on the way - smarter, more flexible, more adaptable and more affordable.

We bring major changes to the factory floor, as well to the global competitive landscape with our new Low-Cost Turning Cells.

Our latest models entering factories and being developed by our experienced engineering team are a different breed. They can work alongside standard CNC machines with the same operators and add huge productivity to your factory without any extra personnel needed.  All are easy enough to program and deploy that you no longer need expert overseers.

That will change not only the way an increasing number of products are made. It could also mean an upheaval in the competition between companies.  By reducing your labor costs, they also may allow yours and other high-wage countries to get back into some of the processes that have been ceded to China, central Asia, India, Africa, Mexico and other countries with vast armies of lower-paid workers.

Bar feeders, bar loaders, parts catchers, parts conveyors, overhead gantry loaders / unloaders, and integrated milling functions are all examples of turning center or CNC lathe automation.  Each of these technologies serves to eliminate, reduce, or limit the amount of human intervention.  Thus this improves spindle efficiency or increasing up-time, reducing operator error which reduces scrap while improving production rates and operator safety.  Ultimately, this reduces cost/finish part. 

There are a number of 3rd party suppliers for these technologies, but just like with all automation, that which is inherent to the design or built in by the machine tool OEM is the preferred choice. 

 

Do you want to know all about our Robotturn ?

Call "Patrick" +32 (0)475736351 (Belgium)

He will explain you all about our Machines.

(Nederlands - Français - English - Deutsch)

MAIN COMPONENTS:

  • Ball screws & linear guideways…………….........…NSK/THK (Japan), PMI/HIWIN (Taiwan)
  • Bearings……………………………………………….NTN (Japan)
  • Motors/drivers………………………………..…….....YASKAWA/FUJI (Japan), Syntec (Taiwan)
  • Controller………………………………………………SYNTEC (Taiwan), FANUC, SIEMENS
  • Electronic switching parts………………………........SCHNEIDER, SIEMENS (France/Germany)
  • Hydraulic cylinder & parts……………………….......Taiwan
  • Pneumatic parts….……………………………………SMC (Japan), Festo
  • Switches...................................................................Omron (Japan - France)
Automated turning centers, automated CNC lathes, turning centers with automatic loading and unloading, turning centers with gantry loading and unloading, CNC lathes with automated gantry loading and unloading, robotic turning centers, robotic CNC lathes, turning center robotics, automatic CNC lathe part loading and unloading